Description
Item Description
Automatic Oil Press Machine
Features & Details
【PREMIUM QUALITY】- The oil extractor machine is made up of 304 stainless steel, which is anti-rust and has high impact and low-temperature resistance. The stainless steel hopper is formed by a specialized stamp die, which features high durability and sturdiness. 【HIGH OIL YIELD】- The extraction rate of oil seeds is up to 95%, which depends on the oil seeds. Moreover, it can work 24 hours without stop. Compared with other machines, our machine has higher efficiency. 【HOT/COLD/FRYING PRESS】- The oil extractor machine with a built-in thermostat heating device can meet all your needs for hot, cold, and deep-fried settings. Get ready to enjoy natural and healthy oil. The heat dissipation and air exhaust can prevent overheat of the machine and prolong its service life. 【EASY OPERATION】- Turn on the heat switch, preheat for minutes, then feed the seeds into the hopper, and there comes the oil. The automatic oil press can be cleaned with a matching cleaning brush to save time and effort. Insulated gloves can protect your hands from burning, and there's also a funnel. 【WIDE APPLICATIONS】- Our oil press machine is widely used for peanuts, sesame seeds, nuts, corn, soybeans, avocados, avocados, coconuts, castor, hemp seeds, canola, sunflower, linseed, walnuts, etc.
Notice:
1.Never put fingers or hard objects such as a metal bar into the chamber entrance to stir raw materials. 2.Olive oil pressing: must remove the core seed and cut the fresh olive into pieces of peanut size, then Dry fresh olive by sunshine or use a microwave oven to heat it 5-6 minutes before feeding into this machine. 3.For pressing olive oil: Please firstly remove the pits and cut olives into pieces of peanut size (which makes it easier to feed to the pressing barrel). Also, the whole process would take longer pressing seeds. 4.Special attention to the raw materials can not be pressed, corn, olives, rice, pork, rice.
Specifications
Oil Yield Rate: >95% of the oil content of the material Oil Press Speed: 6-14 lb/h/2.7-6.3 kg/h Heater Power: 460W Voltage: 110V/60HZ Product Dimension(L x W x H): 460x242x191 mm/18x9.5x7.5 in
Package Content
1 x Oil Press Machine 1 x Oil Filter 1 x Oil Drain Cup 1 x Cleaning Brush One Pair of Insulated Gloves
Manual Oil Press Machine
Features & Details
【FOOD-GRADE MATERIAL】- Made of food-grade 304 Stainless Steel, this manual oil press machine is durable, sturdy, anti-rust, anti-corrosion, energy-saving, and no harm to your health. Besides, the included bottles can be replaced by standard household bottles, leaving you with no worry. 【MANUAL OPERATION】- The ergonomic hand crank is comfortable and labor-saving. After everything is set, you can easily spin the hand crank to extract oil, and you will enjoy the process and taste the purest and the most healthy oil. 【EASY ASSEMBLE & CLEAN】- We have everything you need. All you need to do is to assemble the stainless steel oil press machine step by step and start making fresh oil. Except for the machine, we also offer you one clean brush to help you clean it at ease. 【SAFETY DESIGN】- The semi-circular baffle of our oil extractor machine is designed to keep the alcohol bottle at the place during operation and ensure that it won't hurt you even when accidentally being broken. The press cage and all metal parts of the machine can get very hot during working, please don't touch them. 【WIDE APPLICATION】- Make your healthy home-made oil with our oil expeller extractor. Our household oil extractor is suitable for most oil crops in which oil content is more than 25%, like peanut, sunflower seed, tea seed, sesame seed, walnut, olive, coconut, flaxseed, etc.
Please Note:
1.It is very normal for oil and extracts to flow out of the terminal adjustment bolt at the beginning. You can place a plate or container at the bottom to catch this residue. 2.If you find the handle is too stiff during operation, you can loosen the terminal adjustment bolt. 3.If you find there is too much oil in the press cage, you need to tighten the adjustment bolt. If the ingredient you wish to use is very small, such as sesame seeds, then you can add another oil to the ingredient so that it can go through the press more smoothly. 4.Freshly pressed oil should be left to cool for 5-7 hours and then consumed within 2-3 days. 5.It is imperative to clean the machine thoroughly after every use, otherwise the residue in the machine will harden and will affect the next operation of the machine. The machine should also be cleaned before use, if it has been in storage or not used for a while. 6.The press cage and all metal parts of the machine can get very hot during operation. 7.Please handle with care and wear necessary protective equipment. Do not touch the hot parts with your bare hands. Allow the machine to cool down before cleaning and disassembling. 8.The round metal caps can be used to protect your table from screw marks/dents. They can also act as a gap filler if your table is too small and the screws do not reach the table.
Installation:
1. Before each use, thoroughly clean and dry all parts. 2. Start by affixing the frame to the L shaped metal piece. There are three pre-drilled holes on the L shaped metal piece and the frame, they should be aligned and secured with the provided bolts to form one piece. 3. You should then fix the rack to a firm surface. Insert the bolts from the bottom, and fasten them until the frame is firmly secured to the table. You can use the provided round metal pieces to protect your table, and also act as a gap filler if your table edge is not thick enough. 4. The handle: First affix the crank at the bottom of the handle. Then insert the handle to the screw shaft at the end of the press cage and use the bolt to fasten it via the pre-drilled holes. Make sure the handle can rotate effortlessly and smoothly. 5. On the front part of the press cage, you should fasten the press cage cap followed by the terminal adjustment bolt. 6. Fuel bottle: The provided wick should be inserted into the metal cap with the pre-drilled hole. Fill the bottle with kerosene or alcohol fuel (It should be 80% full). Leave 0.5cm of the wick outside and put the longer end in the fuel bottle. Place the fuel bottle under the press cage, towards the outside. Secure it with the rubber band so that the fuel bottle stays put and does not move during operation. 7. Plastic oil bottle: Place the empty plastic oil bottle under the opening of the press cage. The bottle will collect the usable oil. If you use your own bottle in the future, make sure it is heat proof. 8. Inlet Plate: Fill the plate with the raw ingredient and let it sit at the top of the press cage.
Specifications
Material: Stainless Steel 304 Color: Silver Structure: Mainly Divided Into The Frame, Exploding And Pressing Bolt Suitable Raw Materials: Most Of The Oil Content Is More Than 25% Of The Oil Crops Size: (270 X 50 X 350)mm Oil Mill Size (Including Packaging) Package Size: 15" X 11.8" X 3.5" (375 X 300 X 75) mm
Package Content
1 x Manual Oil Press Machine 1 x Oil Bottle 1 x Alcohol Bottle 1 x Clean Brush
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.